Sunday, 29 January 2017

module 4-chapter 7-to apply paper pulp to a woven fabric grid part 3

 7r: here I tried to make a long sample made in two parts. Some cut out circles from another sample were applied to the fabric: in the upper part of the sample those circles are between the fabric and the paper, in the lower part they were applied on top of the fabric

 7s: fine sewing thread was wrapped around a square wire frame and then dipped into the paper pulp. I like the holes formed at the edges . Some golden paint was applied with a "pearl pen" from Viva Decor. Initially I wanted to introduce some beads to the thread during the wrapping process but forgot about it. The "beads" hadn't fully dried when I applied the pulp and turned flat.
Nevertheless I love this sample. Thread forms a grid that looks like drawn lines

 7t: another little sample made by wrapping red sewing thread around a frame. Knitting thread was then woven into it before being dipped into the pulp. Some black pulp was put on top to keep the whole threads together
7s+t: just a little try how it would look like if I put sample 7t on top of sample 7t

7u: here the circles were cut out by hand as the Silhouette plotter wouldn't cut properly. However, the software allows to place the circles in a regular grid very easily. The fabric was then embedded onto black pulp and framed with red pulp with red paper pulp dots put in the middle of the circles

7v: the word  "list" was welded with the Silhouette software to form a grid cut out of coton poplin (backed with Silhouette adhesive paper to stiffen it). When you turn the sample the word are not recognizable any more but the negative space form interesting shapes
2


Wednesday, 11 January 2017

Module 4-Chapter 6-To apply wet paper pulp to woven fabric - part 2

7l: here the woven fabric with the withdrawn threads was pushed into the very wet paper pulp so that the pulp came through the threads

7m: some of the threads were withdrawn, then gaps were cut into the fabric. Again the fabric was pushed into the wet pulp to make sure it is embedded safely

7n: the fabric grid was made by cutting out horizontal strips then these were used to be put back into the created gaps.
7o: fabric strips with withdrawn threads were embedded into the red pulp, then black paper pulp was put on top. I like the way the fabric structure shows through the black pulp. This structure could be reproduced onto the black pulp with stitch


7p: withdrawn threads from previous fabrics were embedded into the black pulp, then a frame of red pulp was put on top
7q: the letter "S" was cut out of some red paper and embedded, together with some fabric strips onto black pulp. The letter doesn't seem to be very "integrated" but I think the later stitching will help unify the whole sample

This second batch of papers proved more successful as I embedded the fabric into the very wet pulp. I'm quite happy with the results as the fabric really gives the impression "to be part of" the paper

Saturday, 7 January 2017

Module 4-Chapter 7-To apply paper pulp to a woven fabric grid

 7a: for this first sample I took a rather coarse fabric with threads that could be easily withdrawn.
 Due to the quality of the thread the sample looks more like an old artefact. The fabric could be embedded perfectly due to the very open grid
 7b: here the fabric grid is kept in place by positioning the paper pulp around it. There is also paper pulp applied on the edges of the back to really embed the fabric well. I like the underlying structure of the dangling threads.
 7c: single threads were put onto the sheet of paper to form a very loose grid. However, the different threads don't keep in place very well. Here the stitching will be helpful


 7d: torn fabric strips were put onto black paper pulp and red paper pulp was put on top to keep the strips in place. This didn't really help so I stitched the fabric strips to the black paper pulp

7e to 7 g for this and the following two samples I made different frames with wire and wrapped various threads around before applying black and red paper pulp. I especially like the round sample 7f and the organic holes in it.


 7g: again some stitching had to be done to keep the threads attached to the paper pulp. I think the black paper pulp was a bit to coarse to that the threads couldn't be embedded very successfully.

 7h: fine nylon net was used here as a grid. I love the delicacy of this sample and look forward to stitching into it.

7i:not a very successful sample, probably due to the quality of the black paper pulp.



7j: This sample was more of an  experiment and was done with knitting yarn. Again stitching has to be used to keep the pulp in place


7k: a grid was created by cutting holes into the fabric which was then embedded into paper pulp. I think I could have done the holes bigger but I like the potential of this technique that allows you to position the apertures where you want them . Sample 7l  shows the cut out circles embedded into red pulp onto black pulp


Thursday, 5 January 2017

Module 4-Chapter 6 - Drawn Thread Work Stitchery

A selection of bought dyed threads

 6a: Stitchery ideas to decorate the drawn fabric:
- row 1+2: weaving wit strips of torn black fabric, stitched with fly and cross stitch
- row 3+4: weaving with burgundy knitting yarn
- row 5+6: weaving with black/red cord
- row 7,8,9: weaving with black ribbon, a red embroidery was woven through the black rows vertically
- row 10: knotte rows, partly beaded
- row 11: red organza ribbon knotted
- row 12: red organza ribbon knotted and beaded
- row 13: herringbone stitch "woven" around a set of 4 threads
- row 14: black and red embroidery thread wrapped around a set of threads
- row 15: blanket stitch worked down columns of withdrawn threads
- row 16+17: blanked stitch worked horizontally




 6b: 
- row1; chain stitch worked across a machine stitched row
- row 2: machine stitched
- row 3: simple weaving with black ribbon
- row 5 simple weaving with fine red thread with a black thread woven vertically through it
- row 6: weaving with thick knitting yarn
- row 7:  weaving with a narrow ribbon, columns of black blanket stitch added
- row 8: cross stitching
- row 9; weaving with a large braided cord
- row 10: bands of withdrawn threads were held together by wrapping a red embroidery thread around it
- row 11: machine stitching
- row 11-14: weaving with torn red fabric strips to form a pattern
- row 15: weaving with knotted black and red fabric strips, stitched with a straight stitch to keep it in place
- row 16-18: weaving with black and red fabric strips
- last row: weaving with braided cord








6c: black and red pipe cleaners were woven through the fabric and further attached with blanket stitch. Although lying reasonably flat, this little sample can be bended to form a 3-dimensional item.
I like the somewhat organic look of this sample. The pipe cleaners could be wrapped before being woven


6d: Diagonal stitching on the cross-overs
This exercise was done with different kind of threads from knitting yarn to braided cords in different red tones. I took some time to figure out how this method works.


 6e: Diagonal stitching on the bars
equal groups of threads were withdrawn to form a grid. Stitching was then done (both hand and machine) across the withdrawn bars. I love the little "centers" that this method produces. Further weaving could be done through the grid.


 6f: Machine zig-zag stitching
This sample was done without the use of a hoop and the zig-zag stitch was done with lowering the feeed dogs. I tried to vary the stitching sometimes gathering just a few threads, sometimes grouping more threads together. This way of working results in a very unpredictable organic look.
I also introduced different threads to group together and stitched them down horizontally to split up the grid
This added another color dimension to this sample

6g: another sample using zig-zag machine stitch, weaving in the withdrawn threads and introducing other different red threads


6h: here bands of withdrawn threads were formed and stitched down with a zig-zag stitch, further machine stitching was added


6i: here the threads were snipped in the centre and withdrawn from the centre outwards. The bundles of withdrawn threads are held down at the beginning and the end . The further machine stitching was done over each short bar.

6j: Although it doesn't look like it, a lot of machine stitching went into this sample. Threads were first withdrawn both horizontally and vertically. The machine stitching was done across the bars with black and red thread. Additional black threads were introduced horizontally and overstitched with red thread. Simple lines were added with straight machine stitching, then little "stitched beads" were added. I also added some tiny beaded for a little bit of sparkle and in the lower part of the sample big red beads were introduced

6k: for this last sample the threads were withdrawn both horizontally and vertically. Because of the loose weave nature of the fabric some of the threads in the middle section went "loose" and I had to back them with a red ribbon from the back which was fixed with some machine zigzag stitching.
In the upper section braided cords were woven through the bars which had been wrapped with machine stitching.
Cross stitching was added in the "ribbon backed" section followed by two machine stitched rows and finally in the last row further weawing was done.
The whole sample was then framed with running stitches in red and black.
 I especially like the way the fabric reacts when you try out a different machine stitch. Even though I've used different reds with the more rasberry coloured fabric, it seems to work